B66 won’t pair with headphones? Check the Bluetooth link
Check B66 TX mode, headphone pairing mode and any existing phone connection before troubleshooting the wired audio source.
Identify the two devices that should connect
For listening to a wired source through Bluetooth headphones, the intended wireless link is B66 to the headphones. A compatible TV or other source feeds B66 through an analog AUX/RCA audio cable. A phone’s list of paired devices is not a list of connections made by B66. If the headphones announce a connection but you still hear phone music, that is a clue to check the phone connection first. Do not set B66 to RX, pair a phone to it and expect it to forward that Bluetooth stream to headphones: RX and TX are separate operating modes.
In this guide · 6 sections
Check power and TX before changing anything else
B66 requires USB-C 5V power during use. Its supplied instructions identify TX with a red indicator and RX with a blue one. Use TX for the wired-source-to-headphones setup; RX is the direction for receiving phone music into wired speakers or an amplifier. Confirm the selected mode using the supplied instructions before retrying pairing. The red color identifies the transmitting role in our product materials. Color alone should not be treated as proof that your particular headphones have connected. We do not assign additional meanings to flashing patterns that have not been verified here.
Turning headphones on is not always pairing mode
Look up how your headphone model pairs with an additional device. The normal power-on action may reconnect to something already saved instead of starting a new pairing. Sony’s WH-CH520 troubleshooting guide, for example, distinguishes its first pairing from adding a later device. Its button instructions belong to that headset; they are not instructions for B66 or every pair of headphones. Use your own headphone manual to confirm the pairing prompt or indicator, then follow B66’s TX pairing procedure. Keep the two units near each other for this check, at the distance recommended by the headphone maker.
Temporarily disconnect the phone if it keeps taking the connection
Check the phone’s current Bluetooth connection status, not just whether the headphone name is saved. If it shows the headphones connected, disconnect them there before trying B66 again. If they immediately reconnect, temporarily switch off Bluetooth on that phone while checking the transmitter link. Sony documents automatic reconnection to the last device for WH-CH520 and suggests disabling that device’s Bluetooth when it interferes with the intended connection. This is a model-specific example, not proof of a B66 fault. Test one pair of headphones first; the check does not establish simultaneous headphone support. Restore any phone connection you need after testing.
A connected headset can still receive no source audio
Once you have evidence of the intended headphone connection, move to the wired path if it remains silent. Confirm that the source cable comes from an analog audio output and enters B66’s TX audio input path. An RCA input on a TV will not send sound out, and B66 has no direct optical or HDMI connection. Check that the selected program is playing and that the source output is enabled and not muted where applicable. Keep listening levels low while changing one setting at a time. The related TV-output guide covers this part; repeatedly pairing cannot supply a missing wired audio signal.
Keep a short record before resetting devices
Write down the headphone model, the pairing prompt or indicator you observed, B66’s selected mode, and whether the headphones were connected to a phone during each attempt. Include the source model and a photo of its output labels. If another pair of Bluetooth headphones is already available, trying it with the same setup can provide a comparison, but one successful combination does not prove compatibility with all models. Use reset or pairing-memory instructions only for the exact device, noting any saved connections they will remove. We have not independently verified B66’s compatibility with every headset, or measured its latency and codec performance.