One speaker is silent after adding Bluetooth? Check the RCA path
Trace a missing left or right channel through the cable, stereo input and source. A practical checklist for Home B35 and B66 in RX mode.
Keep the working channel as a clue
Music comes from the left speaker, but the right one stays quiet. Before pairing the phone again, trace the whole connection: phone → Bluetooth receiver → analog stereo input → amplifier and speakers. Sound on one side is a reason to inspect the left/right audio path; it does not identify a faulty receiver by itself. Keep the same short passage of music for each check, note which speaker is quiet, and change one connection or setting at a time.
In this guide · 7 sections
Check the two RCA plugs as a pair
Switch the equipment off before moving audio cables. At the amplifier or powered speakers, both RCA plugs must belong to the same analog input pair. One plug in CD and the other in AUX leaves an incomplete connection for either selected input. Follow the L and R labels, normally white for left and red for right, at both ends. On a 3.5 mm-to-RCA lead, check the single 3.5 mm plug as well as the two RCA plugs; seat each one fully without forcing it. Restore power with the listening volume low.
Use the receiving path on B35 or B66
Home B35 sends received Bluetooth music through its analog AUX/RCA output path and needs USB-C 5V power. B66 can do this job in RX mode, identified by blue in the supplied instructions. Its TX mode serves a different connection, sending a wired source to Bluetooth listening equipment. For this check, connect the receiving output to a compatible analog line input on your stereo. Leave PHONO, digital coaxial sockets and output sockets out of that path. The input-label guide below explains those distinctions. Neither adapter replaces the amplifier needed by passive speakers.
Compare another recording and check channel settings
Try a second recording that you already know plays through both sides of a working stereo setup. Do not judge the connection from one instrument or a short passage that happens to favor one channel. Check the stereo manual for its left/right balance or speaker-level settings, noting their original positions before making a temporary comparison. Sony’s STR-DH770 help guide, linked below, includes cable connections and speaker levels in its specific-speaker checks. Use your own amplifier’s instructions for menu names; that Sony guide does not establish compatibility with every stereo.
Try another source on the same input
If you already have a known-working analog source and a suitable stereo cable, try that source on the same amplifier input. Switch off before changing connections, then restart at low volume. Keep the selected input and speaker arrangement unchanged. If the same speaker is still quiet, the input, amplifier settings or speaker path deserves attention before the Bluetooth connection. If both speakers now play, return to the receiver’s cable and source settings. When the comparison also required a different cable, write that down: you changed two things, so the result cannot single out the receiver.
Use an RCA swap only to narrow the search
With a clearly labeled left/right line-input pair, you can compare the channels without moving speaker wires. Switch off, swap only the two RCA plugs at that same amplifier input, and restart quietly. Leave the receiver end as it was. If the quiet side moves to the other speaker, investigate the signal or cable feeding those plugs. If the same physical speaker stays quiet, investigate the amplifier input and everything after it. These are clues, not proof of a particular failed part. Switch off and restore the original L/R arrangement afterward. Skip this check if your input uses a single 3.5 mm socket or the labels are unclear.
Send the connection details with the result
For help, include the amplifier or powered-speaker model, whether you use B35 or B66 RX, a photo showing both ends of the audio cable, and the input selected on the stereo. Say which physical speaker is silent and whether another source or the RCA swap changed that. If the stereo still loses a channel with a known-working source, follow its manufacturer’s troubleshooting instructions rather than opening the equipment. These checks help locate a missing channel; they are not a claim that either AUDORIVO model has a measured channel fault or a guaranteed repair.