United States delivery only · Ships from China within 2 days
Built to keep good audio gear in use — now with wireless music.
Car audio

Bluetooth connected, but no sound from your car AUX?

Check the stereo source, phone audio output, volume and AUX connection when a B61 or B71 receiver connects but your car speakers stay silent.

A connection message covers only part of the setup

Your phone says connected, the track timer is moving, and the car speakers are silent. With Drive B61 or Drive B71, check this path: phone audio → Bluetooth receiver → 3.5 mm AUX input → car stereo. USB supplies power to the receiver; it does not carry music into the stereo in this setup. A successful Bluetooth connection still leaves the wired connection and the selected stereo source to check. Park before changing settings or moving plugs, and keep the stereo volume low while you work.

In this guide · 7 sections

Select AUX on the stereo

Look at the source shown on the car display. Select AUX even though the phone is using Bluetooth: the car receives this adapter’s signal through its AUX socket. Selecting the car’s own Bluetooth or USB source listens to a different connection. Check that the 3.5 mm plug is seated fully in the socket identified as AUX in the vehicle manual. If AUX is missing from the source menu, check that manual for how the input is enabled before changing phone settings.

Check where the phone is sending the music

On an iPhone, start a track or podcast, open the playback destination control, and select the connected receiver. Apple also provides that control on the Lock Screen and in Control Center; its instructions are linked below. On Android, open the connected receiver’s Bluetooth settings and check that Media audio is enabled if that option is available. Google’s troubleshooting guide treats media and phone-call audio as separate settings, so a working call does not establish that music is routed correctly. Menu names vary by phone and Android version. Check whether another connected accessory, such as earbuds, is receiving the sound. Then return to the audio app and confirm playback has resumed.

Bring up one volume control at a time

Begin with a low stereo volume, make sure the phone’s media volume is audible, and then increase the stereo gradually. Use the receiver controls according to its instructions. B61 materials describe physical volume buttons. For B71, a brief left or right turn changes the track, while a held turn adjusts volume. A quick twist of that knob may therefore skip the song without making it louder. Avoid turning every control to maximum while nothing is playing; sound may return as soon as the missing connection is corrected.

Test the AUX input with a source you already know works

If you have a portable player or another device with a known-working analog headphone output and a suitable cable, try it on the same car AUX input. Lower the stereo volume before swapping cables. Keep AUX selected and use the same audio clip if possible. If that source is also silent, investigate the car input, cable and source selection first. If it plays, you have evidence that this part of the setup works. That result alone does not prove the Bluetooth receiver is faulty; the phone’s routing, receiver power and its own audio lead still need checking.

Reconnect after checking the audio path

Confirm that the receiver has the specified USB 5V/1A supply described for these car models. A car USB port used for charging does not replace the AUX connection. After checking power and the wired path, try disconnecting and reconnecting the receiver in the phone’s Bluetooth settings, then select it as the playback destination again. If you have a second phone available, disconnect the first one before testing it. Change one thing and replay the same clip each time. A different result with the second phone is useful troubleshooting information, rather than a reason to replace several parts at once.

Send the checks you have already made

If the speakers are still silent, send the car year and stereo model, phone model and operating-system version, whether you have B61 or B71, and a photo of the AUX and USB connections. Include the source shown on the stereo and the result of any direct AUX test. Say whether the problem happens immediately or only after restarting the car. Reconnection behavior has not been independently verified across vehicles, so those details matter. The product pages below list the connection requirements; the related guide explains why both leads are needed.

← All audio guides
WhatsApp us