Switching phones on a Bluetooth stereo receiver: B35 and B66
Hand music from one phone to another on a home stereo. Check the active Bluetooth connection, keep the AUX/RCA wiring in place, and know when to pair again.
Start with one phone playing, then hand over
Your phone is playing through the living-room stereo, but someone else wants to put on a different album. Start by pausing your music and releasing your phone’s Bluetooth connection before connecting theirs. With Home B35 or B66 in RX mode, the wired path into the stereo can stay in place. This is a one-phone-at-a-time handover to check with your devices. We have not verified multipoint support, how many phones either receiver remembers, or whether it automatically gives a second phone priority. Two names in saved-device lists do not establish two active audio connections.
In this guide · 6 sections
Keep the working stereo connection in place
For B35, the path is phone → Bluetooth → B35 analog output → a compatible AUX or RCA line input on your amplifier or powered speakers. B66 uses the same receiving direction in RX mode, identified by blue in its supplied instructions. Leave B66 in RX; changing it to TX changes the job to sending wired source audio to Bluetooth headphones or speakers. Both receivers need USB-C 5V power. If the first phone already plays correctly, note the selected stereo input and keep the power and audio cables connected. Turn the listening level down before trying the other phone; its starting volume may differ.
Release the first phone’s connection
Pausing a song stops playback but does not prove that the phone has disconnected. Open that phone’s Bluetooth settings and check the receiver’s current status. Google’s Android instructions distinguish Disconnect from Forget: disconnecting releases the connection, while forgetting removes the saved device. Menu labels can vary by phone and software version. Use a disconnect action if your phone offers one. If the receiver immediately reconnects to that phone, temporarily turn Bluetooth off in the phone’s settings for this check, remembering that this also interrupts other Bluetooth accessories. You do not need to erase every saved device just to find out which phone holds the connection.
Connect the second phone and check its status
On the second phone, open Bluetooth settings. If the receiver is already saved, select that entry and check for a connected status. If it is not saved, use the receiver’s supplied instructions to make it discoverable, then complete pairing on the phone. Apple’s connection guidance makes the same distinction between a previously used accessory and one that needs discovery mode for a first pairing. Do not guess a button-hold duration or PIN from instructions for another receiver. Leave the first phone disconnected while trying this. A receiver name appearing in a list is a useful first step; it is not yet confirmation that music is going there.
Check where the second phone sends its music
Play a short track on the second phone at a low level and check its audio-output selection. If its own speaker plays, check the selected output rather than moving the stereo cables. If the stereo still plays the first phone’s music, pause both phones and inspect their connection status again. If both are silent, confirm that playback is running, neither relevant volume is muted, and the stereo remains on the input that worked earlier. Reconnecting the first phone, with the second disconnected, can be a useful comparison. It helps separate a second-phone connection problem from a change to the shared wired setup, without proving that either phone or receiver is faulty.
If a saved connection keeps failing
Treat forgetting and pairing again as a separate troubleshooting step, rather than a routine part of taking turns. Apple recommends unpairing and returning an accessory to discovery mode when a previously used connection will not work; it also suggests unpairing from other devices when those connections interfere. Follow the instructions for the phone and receiver you actually have, then pair again. Before asking for help, note both phone models, their software versions, which phone showed Connected, and whether each could play when tested alone. That is more useful than simply reporting that Bluetooth is on. Automatic handover and every phone combination remain unverified for B35 and B66.