United States delivery only · Ships from China within 2 days
Built to keep good audio gear in use — now with wireless music.
Home stereo

Connecting a turntable to Bluetooth headphones: start with LINE output

Check the phono preamp and analog output before adding B66 in TX mode. A practical connection plan for listening to records through Bluetooth headphones.

Put the phono stage before the Bluetooth transmitter

To send records to Bluetooth headphones with B66, start with a compatible analog line-level audio output. The path is turntable → phono preamp, if needed → B66 in TX mode → Bluetooth headphones. Some turntables already include the phono preamp, so that separate box may be unnecessary. B66 provides the transmitting step; its AUX/RCA connection is not a replacement for a phono stage. U-Turn Audio describes the same need for a phono preamp and transmitter in its turntable guidance, linked below.

In this guide · 6 sections

Read the switch as well as the socket label

Look at the turntable manual for a built-in phono preamp and how to enable it. On a model with a PHONO/LINE selector, LINE normally enables that stage for a line-input connection. Sony explains this distinction for its turntables; some of its models use an EQ switch instead. Follow the instructions for your exact model before connecting it to an analog transmitter. A red-and-white RCA pair alone does not tell you whether the signal is PHONO or LINE. If the turntable offers only an unamplified phono output, a plug adapter does not perform the missing conversion.

Use the output of a suitable external phono preamp

For a turntable without a built-in phono stage, check the cartridge and turntable requirements when choosing an external one. Connect the turntable to that preamp as its manual specifies, then use the preamp’s analog line output for the transmitter. If the turntable already has an enabled built-in stage, do not also route its LINE signal into another PHONO input. The related AUX/CD/PHONO guide explains why those input labels matter. Keep speaker terminals out of this connection: B66 takes an audio-source signal, not the powered output used to drive passive speakers.

Connect the audio cable, then choose TX

With the equipment off while arranging cables, match the source’s analog left/right output to the B66 TX input path using a suitable cable. Check connector types at both ends, including whether the source has sockets or a fixed lead. B66 materials list AUX/RCA audio input for TX and USB-C 5V power; the USB connection supplies power in this setup. Select TX, identified by the red indicator in the supplied instructions. Blue identifies RX, the separate mode for receiving Bluetooth music into wired equipment. RX is the wrong direction for sending a record to headphones.

Pair the headphones with B66

Put the headphones into their pairing mode and follow the B66 pairing instructions. The wireless link here is B66 to headphones; the turntable feeds B66 through the audio cable. If the headphones keep returning to a phone connection, disconnect them from that phone before trying again. Start with the headphone volume low using the controls described in their manual, then play a record and increase it gradually. Check how your particular headphones adjust listening level. Successful pairing confirms the wireless connection, but music still depends on the turntable output and preamp settings.

If the sound is missing or unusually quiet

Trace the wired path first: confirm the turntable output setting, any external preamp’s power and output, the audio cable, and B66’s TX mode and power. Avoid turning every volume control to maximum while searching for a missing signal. If you already have an amplifier or powered speakers with a known-working line input, checking the same source output there at low volume can help narrow the problem. For a compatibility check, send the turntable model, preamp model if used, a photo of the output labels, and the headphone model. This guide maps the connection requirements; we have not tested every turntable/headphone combination or independently verified B66 codec, latency or sound-quality performance.

← All audio guides
WhatsApp us