Android music works, but calls use the phone: B61 and B71 checks
Music reaches your car AUX speakers, but a call stays on the Android phone. Check Phone audio, other Bluetooth connections and the call route before changing cables.
Start with the part that already works
A podcast plays through the car speakers, then an incoming call is audible only on the phone. That gives you a useful starting point: the receiver can send music through this AUX connection. Do not pull out the audio plug or change the stereo source yet. With B61 or B71, USB provides 5V/1A power and the separate 3.5 mm lead feeds the stereo. Park before checking the phone, keep the stereo volume modest, and arrange a short call with someone who can help you check both directions of the conversation.
In this guide · 6 sections
Look for Phone audio on Android
Open the phone's Settings, find Connected devices or Bluetooth, and open the settings beside the receiver's name. Google's Android troubleshooting instructions distinguish Media audio from Phone audio. Look for Phone audio and enable it if that control is available. A working music connection does not establish that calls are enabled for the same accessory. Menu names and available switches vary by phone; use the handset manufacturer's instructions if yours looks different. Return to a call after the change and check where the other person's voice is heard.
Check the other connected accessories
Earbuds or the car's original Bluetooth system may also be connected to the phone. Google specifically recommends checking whether another paired device is receiving calls. For a simple comparison, temporarily disconnect accessories you are not testing, leaving the B61 or B71 connected. Disconnecting is enough for this check; there is no need to erase every saved pairing. If the call screen offers an audio destination control, inspect the selected device rather than assuming that the music destination also handles the call.
Keep AUX selected when testing this receiver
The car stereo still receives the adapter's output through AUX. Switching the stereo to its own Bluetooth source selects a different audio path, even though both paths involve the same phone. Keep the USB supply and AUX plug in place during the call test. B61 materials describe physical call controls; B71 instructions describe pressing the rotary control to answer or end a call. A button answering the call is only one result to record. Separately check whether you can hear the caller through the speakers and whether the caller can hear you.
Separate routing from a microphone complaint
If the caller's voice now comes through the car speakers but they cannot hear you, the symptom has changed. Check the phone's in-call mute control before altering the AUX connection. B61 materials describe a built-in microphone, but its pickup quality and echo behavior have not been independently verified in representative vehicles. B71 call quality also remains unverified. Do not take a successful music test as proof of microphone performance, or replace the audio cable solely because the other person hears little sound. Note whether your voice is absent, quiet or accompanied by echo. Those observations help narrow the next check.
Record the result before changing another setting
Try a call in the phone's regular dialer and note whether the issue also occurs in a particular calling app. Treat those as separate observations rather than assuming every app behaves alike. After ending the call, check whether music resumes or needs a manual tap; automatic switching has not been verified across phones and vehicles. If help is needed, send the receiver model, phone model, Android version, stereo model, the app used, and which audio destination appeared during the call. Include whether each person could hear the other. These details are more useful than a report that Bluetooth is connected but not working.