3.5 mm or RCA? Choosing a cable for Home B35
Match Home B35’s analog output to your stereo input: 3.5 mm AUX, a left/right RCA pair, or the 3.5 mm-to-RCA lead shown in the package materials.
Choose the cable from the stereo end
Before ordering an extra cable for Home B35, check the input you will actually use on the amplifier or powered speakers. A single 3.5 mm AUX input and a left/right RCA line-input pair need different plug arrangements. B35 has analog AUX and RCA output paths, so the useful choice is the lead that joins a suitable output to that input without unnecessary adapters. For phone music, the route is phone → Bluetooth → B35 → stereo input. You need one working analog connection for that route; plugging in every audio cable shown with the product is not part of the setup.
In this guide · 6 sections
For a 3.5 mm AUX input, use the stereo mini-plug lead
If your powered speakers or amplifier have a suitable 3.5 mm AUX or LINE IN socket, use a 3.5 mm stereo cable between it and B35’s AUX OUT. The current package illustration shows a stereo TRS plug at each end. Confirm that the speaker socket is an input: a headphone socket sends sound out and does not accept the receiver’s signal. Switch the equipment off before connecting, insert the plugs fully without forcing them, and leave enough room behind the equipment that the cable does not pull a plug sideways. Select that AUX input when you turn the stereo back on.
For an RCA input pair, there are two plug arrangements
The 3.5 mm-to-RCA lead shown in B35’s package materials can run from B35 AUX OUT to a suitable left/right RCA input on the stereo. Put both RCA plugs into the same named input pair, matching L and R; the usual colors are white for left and red for right. If you already own a suitable stereo RCA-to-RCA cable, B35’s RCA outputs provide another route to that analog input pair. A two-RCA-to-two-RCA cable is not shown among the listed package leads. Check the ends of the cable you have before buying a duplicate, and keep the unused output connection free during the initial check.
An RCA-shaped socket may still be the wrong destination
A single COAXIAL or DIGITAL IN socket is not the left/right analog input pair required for this B35 connection. Denon’s PMA-600NE rear-panel guide, for example, identifies DIGITAL AUDIO IN separately from its analog AUDIO IN connectors. That is an illustration of reading the labels, not a B35 compatibility test or a reason to buy that amplifier. A cable with ends that fit does not convert B35’s analog signal into digital audio. PHONO and output sockets also need a different connection plan; the input-label guide below explains those cases in more detail.
Keep the power and optical leads separate from this choice
B35 still needs USB-C 5V power whichever analog audio lead you choose. Current package materials show a USB-A-to-USB-C power cable, the two analog leads described above, a Toslink optical cable and a manual; a wall power adapter is not shown as included. Those are the supplied package descriptions, not a physical packout inspection. The optical lead serves B35’s optical input path, whose supported formats remain unverified. It does not replace the analog cable from B35 to the stereo when playing phone music over Bluetooth. Four different cables in the illustration do not mean four connections are needed for this job.
Check the fit and both speakers before tidying the shelf
Restore power with the listening volume low, select the stereo input you connected, pair the phone and play a familiar track. Listen for both channels before hiding the cable or moving the equipment back against the wall. If one speaker stays quiet, follow the channel-check guide below rather than assuming a different plug style will fix it. If both 3.5 mm and RCA inputs are available, choose a suitable cable route with secure connections and convenient access. We have not measured a sound-quality difference between B35’s output options. Neither cable choice replaces the amplifier needed by passive speakers.