B71 knob skips tracks? How its volume control works
A short turn changes tracks on Drive B71; turning and holding adjusts volume. Learn the control while parked, then check playback and AUX if it stays quiet.
A quick turn and a held turn do different jobs
If a quick twist of the Drive B71 knob changes the song instead of making it louder, compare the movement with the supplied control instructions. They describe a short left or right turn for previous or next track, and a turn held in the relevant direction for volume down or up. The volume action is a held turn, not a held press on the center. Follow the direction markings in the instructions. We do not specify a number of seconds or a turning angle because those details have not been verified here.
In this guide · 6 sections
Get music playing before practicing the control
Set up while parked. B71 needs its USB-A lead connected to a suitable 5V/1A power supply and its 3.5 mm lead connected to the car stereo’s AUX input. Select AUX on the stereo, pair the phone, and start a familiar track at a low listening level. You are checking a control action, so first establish that music is reaching the speakers. A powered receiver alone does not confirm that AUX is selected or that the phone is sending media to it.
Make one small volume adjustment at a time
Leave the car stereo at a low, audible setting for this check. Turn and hold the B71 control in the volume direction described in its instructions, then release it and listen before making another adjustment. Keep the phone’s playback screen visible while parked so you can tell whether the track changed or playback paused. If you also adjust the phone’s media volume or the stereo volume, do that separately. Changing all the controls together makes it harder to understand which action helped. Do not keep raising every control when there is no sound; work through the no-sound guide below first.
Keep pressing separate from turning
The supplied B71 instructions assign a press to play/pause during music playback and to answering or ending a call in the relevant call state. Pressing the center is therefore a different action from holding a left or right turn for volume. If the music stops while you are learning the knob, check the playback screen before changing cables or pairing again. Confirm that the track is playing, then repeat just the intended movement. The listed call controls do not establish microphone quality or promise that every phone and app will behave identically.
Try the position before attaching a mounting pad
Before fixing the receiver in place, check that you can make a deliberate turn or press without pulling on its leads. The supplied materials list a 4 cm base and a 2 cm total height, but allow space for your fingers and for the cable route as well. Pick a clean, dry surface that leaves airbags, vehicle controls and moving parts clear. Keep leads away from pedals and the gear selector. Learn the movements while parked; if operating the receiver would distract you while driving, leave the adjustment until you can stop safely.
Describe the action when asking for help
A useful report says whether a short turn changes tracks, whether turning and holding changes the audible level, and whether a press pauses or resumes playback. Include the phone model, operating-system version, audio app, car year and stereo model, plus a photo of the USB and AUX connections. Note any change you saw on the phone during the volume check. These observations are more useful than “the knob does not work,” and they do not require assuming a hardware fault. For model selection, the B61-versus-B71 guide compares the button and rotary layouts; this guide describes B71’s supplied control instructions rather than an independent performance test.