No audio after restarting the car? B61 and B71 checks
B61 or B71 worked before parking but stays silent on the next start? Check USB power, the saved Bluetooth connection, AUX selection and paused playback.
Keep a record of the working setup
Music played before you parked, but the next time you start the car the speakers stay quiet. Before deleting a pairing, compare the setup with the one that worked. B61 and B71 both need USB 5V/1A power plus a separate 3.5 mm AUX connection. While parked, note the USB socket or adapter used, the source shown on the stereo, the phone's connection status and whether the music app is playing. These four observations help separate a receiver that has not powered up from a disconnected phone or a paused track.
In this guide · 6 sections
Observe power through the normal shutdown and start
During an ordinary shutdown and your next start, note whether the receiver appears to lose power and return. If it has an indicator, use its instructions to interpret it; do not assign a meaning to a flashing pattern by guesswork. The dashboard turning off alone does not establish what happened at the USB supply. Check the vehicle manual for the socket you use, including any retained-power behavior. There is no universal switch-off delay to apply here. After the car is back on, check the USB plug and the supply's documented 5V/1A capability before changing the AUX cable.
Check Connected, not just a saved device name
On Android, Google's instructions distinguish a saved accessory from an active connection: with Bluetooth enabled, select the disconnected accessory under Saved devices and look for Connected. Menu names vary by phone. On iPhone, open Settings, then Bluetooth and inspect the receiver's entry; Apple's guide explains selecting the accessory and making it discoverable when needed. Try selecting the existing receiver entry before forgetting it and starting over. Keep another phone previously used with the receiver disconnected during the comparison. Note whether a manual connection succeeds after the start; that result is useful even if music still needs a separate tap.
Restore AUX and check whether playback is paused
Look at the source currently displayed by the stereo. For these receivers it needs to be AUX, because the analog lead delivers the sound to that input. If the stereo returned to radio, its own Bluetooth source or USB, select AUX again and replay the same short track at a modest level. Then inspect the phone app: a track paused during shutdown can stay quiet even after a connection returns. Tap Play once while parked and check where the sound goes. Record whether choosing AUX or resuming playback restored music. Do not treat either change as proof that Bluetooth pairing had failed.
Compare the USB supply without changing the audio path
If the power arrangement remains in doubt, a suitable standalone USB power bank already available to you can provide a limited comparison. It needs a 5V output rated to supply at least 1A. With the car parked and its stereo on, move only the receiver's USB power lead to the bank, leaving AUX in the same input. Keep the bank disconnected from the car charger, and check its instructions for any output shutoff behavior. Reconnect the phone if needed and replay the same track. A changed result is a reason to investigate the supply arrangement; it does not diagnose a faulty vehicle port or establish a permanent fix.
Report the step that brings the sound back
A useful support note says what happened after the next start: no apparent receiver power, saved but disconnected, connected with the stereo on another source, or connected with playback paused. Include the car year, stereo model, phone and software version, receiver model, and USB power source. Say which single action restored audio and whether it was needed again on a later trip. Avoid a factory reset just to erase those clues. Automatic reconnection, reconnection time and automatic playback resumption have not been independently verified across B61/B71 phone and vehicle combinations. If the setup is silent even before a shutdown, start with the full AUX no-sound guide below.