Using B66 with a Windows PC: USB power and AUX audio
Connect a PC’s suitable analog audio output to B66 in TX mode, then pair Bluetooth headphones. Check Windows output selection and keep USB power separate.
Plan for an audio cable as well as USB power
Plugging B66 into a computer’s USB port may provide power, but it does not complete the documented audio setup. For listening through Bluetooth headphones, the path is PC analog audio output → B66 AUX/RCA input in TX mode → compatible Bluetooth headphones. B66’s supplied materials specify USB-C for 5V power; they do not establish USB sound-card support. Choose it for this wired analog source path, rather than assuming its USB connector will add a new Windows audio device. A lit adapter and a moving playback timer can still leave the audio cable missing.
In this guide · 6 sections
Find the computer’s actual audio output
Check the computer manual for a suitable 3.5 mm headphone or line output. A microphone or line-input socket points in the wrong direction. If the laptop uses a combined headset socket, confirm that it supports headphone output before choosing the cable. With a pair of ordinary wired headphones already available, a useful first check is to play a short clip through the computer’s headphone socket at low volume. If that stays silent, check the computer output before adding B66. For a computer without a suitable analog output, stop and confirm a different connection plan; an HDMI port or USB connector alone is not the AUX/RCA feed described here.
Select the wired output in Windows
Microsoft’s Windows sound guidance starts with Settings, then System and Sound, where Output lets you select the audio device. For this connection, choose the computer output that feeds the socket used by the audio cable. Its name depends on the computer’s audio hardware; look for the relevant speakers or headphones entry and check the computer manual if it is unclear. A display or a different headset selected as the output sends the clip somewhere else. Keep the level low but unmuted and replay the same clip. You are selecting the PC’s wired audio output, not pairing B66 through the Windows Bluetooth menu.
Connect B66 and pair the headphones to it
Lower the computer’s output volume before changing plugs. Connect the confirmed analog output to B66’s AUX/RCA input path, supply USB-C 5V power, and select TX using its instructions. The supplied materials identify TX with red and RX with blue; RX is the separate job of receiving phone music for wired equipment. Put the headphones into their own pairing mode and follow B66’s transmitter pairing procedure. Check whether the headphones are still connected to a phone or directly to the PC. In this arrangement, the intended wireless connection is B66 to the headphones, while the PC supplies sound by cable.
If it is powered but silent, check the two links separately
First replay the clip through the same PC output you checked earlier. Confirm that the player is running, its volume is audible and Windows has not been left on another output. Then check the cable into B66, TX selection and the headphone connection. If the headphones announce a connection but play a phone’s music, revisit that phone connection before changing Windows settings. If they connect as intended but receive no clip, the wired source still needs checking. The related pairing guide covers headphone discovery and existing connections. Avoid repeatedly pairing every device while also changing cables; keep one known source and clip for the comparison.
Decide what you need beyond hearing the clip
For music, confirm that playback works at a comfortable level with the computer and headphones where you plan to use them. For video, check a passage with visible speech before deciding the result suits you: B66 latency and codec behavior have not been independently measured here. Hearing audio also does not establish that a headset microphone can return speech to the PC through this setup. USB audio-device and microphone-return support are not documented for B66, so do not choose it on those assumptions for calls or gaming. If the PC already connects directly to your Bluetooth headphones and works as you need, that existing connection may make an extra transmitter unnecessary.