United States delivery only · Ships from China within 2 days
Built to keep good audio gear in use — now with wireless music.
TV & headphones

CD player to Bluetooth headphones: choosing a B66 connection

Check analog RCA or headphone outputs, volume control and existing stereo wiring before connecting a CD player to Bluetooth headphones with B66.

Start at the CD player's output panel

A CD player does not need built-in Bluetooth to feed an external transmitter, but it does need an output that matches the transmitter. For B66, the connection is a suitable analog CD-player output to the AUX/RCA input path in TX mode, then Bluetooth to compatible headphones. A desktop player may have a left/right analog pair; a portable player may offer a headphone socket. Check the actual labels and manual before choosing a cable. If the only available output is digital, this direct analog connection is not ready to use.

In this guide · 6 sections

Separate analog AUDIO OUT from digital output

Denon's DCD-600NE manual identifies AUDIO OUT for equipment with analog audio inputs and describes DIGITAL AUDIO OUT separately for a receiver or converter with a digital input. That is a useful example of why neighboring sockets do different jobs. For a suitable stereo analog pair, keep the left and right channels together when selecting the cable to B66. A digital coaxial socket is not one channel of an analog stereo pair, even if its connector looks familiar. B66's documented inputs are analog AUX/RCA; a plug adapter alone does not turn optical or coaxial digital audio into that signal. The Denon example explains labels, not a tested B66 pairing.

Choose where listening volume will be adjusted

Read which output the player's volume control actually affects. Marantz's CD6007 front-panel guide, for example, describes PHONES as the headphone jack and LEVEL as its headphone-volume control. Do not assume a knob beside that jack also adjusts the rear analog output. If you use a suitable headphone output, begin with its level low and check the required plug size. If the player provides a fixed line output, establish a usable volume control on the Bluetooth headphones before choosing this arrangement. Keep the headphones off your ears while connecting and start quietly. The Marantz control description is model-specific, not a promise that every CD player has the same controls.

Connect B66 and choose TX

Switch the equipment off while arranging the audio cable. Connect the confirmed analog output to B66's TX audio input path with a cable that matches both ends. B66 needs USB-C 5V power in addition to that audio lead. A USB socket on the CD player is not enough evidence that it can power B66; check the source's documented power capability or use an appropriate 5V supply. Follow B66's instructions to select TX, identified by red in the supplied materials. RX, identified by blue, receives Bluetooth music for wired equipment and serves a different direction.

Pair the headphones, then play a known disc

Put the headphones into their pairing mode and follow B66's TX pairing instructions. If they reconnect to a phone, disconnect that phone connection before trying again. Use a CD and track that the player already reads successfully, then check that playback has actually started. A moving track counter does not establish that the chosen audio output is connected, and a headphone connection prompt does not identify the source being heard. Compare one change at a time: source playback, audio cable, TX mode, headphone connection and listening level. The linked pairing guide covers a headset that keeps connecting to the wrong device.

Plan for the stereo cable already using that output

If the CD player's only analog output pair currently feeds an amplifier, moving that cable to B66 removes the amplifier's existing feed. Photograph the connections first so you can restore them. For headphones and room speakers together, ask about the complete system before adding splitters or assuming two outputs work simultaneously. An amplifier's speaker terminals are not a substitute for a line-level feed into B66. If the setup stays silent, check the original amplifier connection again and record whether the same CD track plays there. Send the player model, output labels, cable ends and headphone model for help. Compatibility across players and headphones, simultaneous listening, range and codec performance have not been independently verified here.

← All audio guides
WhatsApp us