United States delivery only · Ships from China within 2 days
Built to keep good audio gear in use — now with wireless music.
Home stereo

Mac connected, but no stereo sound? B35 and B66 RX checks

Check macOS Sound Output, app volume and AUX/RCA wiring when a connected B35 or B66 RX receiver stays silent. USB-C provides 5V power.

Start with the sound you can locate

The Mac shows a Bluetooth connection, the playback timer moves, and the stereo stays quiet. Listen for the clip at the Mac itself or another connected device before moving any cables. A connection status and an audio destination answer different questions. For Home B35 or B66 in RX mode, the path being checked is Mac Bluetooth audio to the receiver, then analog audio to a powered speaker or amplifier. Use one short clip throughout the check and start with the stereo volume low. Write down whether the clip plays elsewhere or is absent everywhere.

In this guide · 6 sections

Select the receiver in macOS Sound Output

Open the Apple menu, choose System Settings, then Sound. Under Output, select the connected receiver's entry. Apple's Bluetooth instructions specifically separate connecting an accessory from choosing it for audio output. Use the name actually shown by your unit; do not expect a particular AUDORIVO name in every device list. If a display, the Mac's speakers or another accessory is selected, choose the receiver and replay the clip. Output is the relevant control for this listening setup. Changing the microphone input does not select where the clip will play.

Check the player as well as the Mac volume

In Sound settings, check the available output-volume and mute controls. Then check the volume inside the app playing the clip. Apple notes that an app's volume control cannot override the computer's output-volume setting. Begin at a modest audible level and adjust one control before replaying. If only one app is silent, compare with a second player while keeping the receiver selected. If only one speaker is missing, inspect the available left/right balance setting, then use the RCA-channel guide linked below. Those symptoms call for different checks than silence from both speakers.

Follow the analog cable into the stereo

Home B35 provides an AUX/RCA output path and needs USB-C 5V power. Connect that analog output to a suitable line input on your powered speakers or amplifier, and select that input on the stereo. Its optical socket is an input, so it is not the output cable for this arrangement. With B66, use RX for receiving the Mac's audio; the supplied instructions identify RX with blue. Its AUX/RCA path then feeds the stereo input, with separate USB-C 5V power. Passive speakers still need amplification. A USB-C power connection alone does not complete either analog audio path.

If the receiver is missing from the output list

Return to Bluetooth settings and check the receiver's current connection. Apple describes turning the accessory on, making it discoverable according to its instructions, and using Connect beside its entry. Keep any phone previously used with the receiver disconnected during this check. After connecting the Mac, return to Sound Output and inspect the list again. Do not erase all saved pairings as your first step. If the same receiver already plays from a phone, a separate phone test with the Mac disconnected can help check the shared wiring; that result does not prove the Mac or receiver is faulty.

Record what changed before replacing equipment

Note the Mac model, macOS version, receiver model, exact output-device name and player used. Include whether the clip played through the Mac, whether selecting the receiver changed anything, and which stereo input the analog cable uses. If sound works until a display or another audio accessory is connected, recheck the selected output at that moment. If playback works but breaks up, use the dropout guide below. B35 and B66 have not been independently tested across Mac models and macOS versions here; Apple's instructions explain system controls, not certification of these receivers. A clear description of the failing step is more useful than ordering a replacement based only on the word Connected.

← All audio guides
WhatsApp us