Spotify playing on another device? B35 and B66 stereo checks
Spotify shows a playing song but your stereo is silent? Check the app's playback device, the phone's Bluetooth output and the B35 or B66 RX connection.
Read the playing device before moving a cable
Spotify's progress bar is moving, your phone says the receiver is connected, and the living-room stereo is quiet. Open the song's Now Playing view and look at the current playback device. If it names a kitchen speaker, TV or computer, start there. Spotify Connect lets one device control playback on another, so the screen in your hand can be a remote control. The song advancing on that screen alone does not show that the phone is sending audio to B35 or B66. Keep the stereo volume low while checking the destination.
In this guide · 6 sections
Bring playback back to the phone
Spotify's official Connect instructions use the device icon near the bottom of the screen to choose where a song plays. Open that list and select the option for the phone you are using when playback is currently assigned to another device. The label and available choices can differ with the app and phone version. Resume the track if needed, then check the phone's media-output selection for the Bluetooth receiver. There are two choices to keep track of: which device runs playback, and where that device sends its sound. Changing the amplifier input will not bring a remote Spotify session back to the phone.
Confirm the phone's Bluetooth audio connection
Open the phone's Bluetooth settings and check the receiver's current connection status. A saved name is not enough. If another accessory is taking the media output, select the intended receiver in the phone's audio controls. Spotify's Bluetooth guidance recommends establishing the Bluetooth connection before opening the app; it also suggests checking that media sharing is allowed. If a fresh connection is needed, close Spotify, connect the receiver using its supplied instructions, then reopen the app and try the same track. If a second phone is already using the receiver, follow the phone-switching guide below and test one phone at a time.
Keep the stereo on the receiving path
Home B35 receives phone audio over Bluetooth and feeds a compatible AUX or RCA line input on an amplifier or powered speakers. B66 uses that direction in RX mode, identified by blue in its instructions. Both need USB-C 5V power. Leave the amplifier on the input where the receiver's analog cable is connected; use a modest listening level and check that neither the phone nor stereo is muted. Switching B66 to TX changes the direction of the connection and will not help it receive this phone's music. The documented setup uses the phone as the player. Neither product page specifies standalone Spotify Connect support.
Use another app to narrow down the silence
Pause Spotify and play a short clip stored on the same phone in another audio app. Keep the receiver, cables and stereo input unchanged. If that clip reaches the stereo, you have a working path to compare with Spotify. Return to Spotify and check its playback destination again before adjusting the hardware. If both apps stay silent, check the phone output, receiver power and analog connection. If the phone speaker plays instead, concentrate on its selected audio output. These observations narrow the next check; they do not identify a defective component by themselves.
Save the device names that made the difference
Before closing the check, note the name Spotify showed when the stereo was quiet and the selection that restored sound. Record the phone model and app version if the behavior returns. This makes a useful support message: playback stayed on the TV, playback returned to the phone but used its speaker, or a second app reached the stereo while Spotify did not. Once sound reaches the right speakers, raise the level gradually. If music now plays in the right place but breaks up, use the separate dropout guide. B35 and B66 app behavior has not been independently tested across every phone and Spotify version.