United States delivery only · Ships from China within 2 days
Built to keep good audio gear in use — now with wireless music.
TV & headphones

Stereo REC OUT to Bluetooth headphones: where B66 fits

Check your amplifier's REC OUT direction, source routing and volume behavior before connecting B66 in TX mode to Bluetooth headphones.

Start at the amplifier's recording output

Your CD player already feeds the stereo, and you want to hear that source through Bluetooth headphones without moving its cable each time. A compatible analog recording output on the amplifier may provide that feed. The proposed path is source device → amplifier's recording output → B66 in TX mode → Bluetooth headphones. First confirm that the amplifier has a stereo line-level output and that it carries the source you want. B66 accepts AUX/RCA audio in TX mode and needs USB-C 5V power. It cannot take the powered signal from speaker terminals.

In this guide · 6 sections

Find OUT, not the neighboring PLAY or IN pair

Look for REC OUT, TAPE OUT or an AUDIO OUT pair identified for a recorder in the amplifier manual. A tape connection may have both an input and an output close together; the input receives sound from a deck and will not feed B66. Denon's PMA-600NE rear-panel guide, for example, identifies AUDIO OUT as the connection to a recorder's input. The same guide identifies its separate PRE OUT as a subwoofer connection. Do not choose a spare RCA socket just because the plug fits: a subwoofer output or a digital coaxial socket is not the stereo analog feed described here.

Check which source reaches that output

Start with a source that already plays through the stereo and read the recording section of its manual. On the PMA-600NE, Denon instructs the user to select the input source to be recorded. Other amplifiers can impose different rules. Yamaha's A-S701/A-S501/A-S301 manual notes restrictions on the LINE 2/LINE 3 recording outputs when those inputs are selected. If your amplifier has a separate record selector, check that control too. Music from the room speakers alone does not confirm that the chosen recording sockets carry it. For an optical, HDMI, network or Bluetooth source, verify the amplifier's output routing rather than assuming it follows the analog inputs.

Connect one analog path and select TX

Turn the equipment off before arranging cables. Use a suitable stereo RCA cable to B66's RCA TX input path, or a stereo RCA-to-3.5 mm cable to its AUX TX input path. Match the left and right channels and use one audio connection for the initial check. Supply B66 with USB-C 5V power, then select TX according to its instructions; red identifies TX in the supplied materials. RX receives Bluetooth audio for wired speakers and serves the opposite direction. Put the headphones into their pairing mode and follow the B66 pairing procedure. If they keep connecting to a phone, disconnect that phone link before trying again.

Set headphone volume before starting playback

Check how your headphones adjust their own listening level and begin low. Do not rely on the amplifier's main knob to protect against a loud recording-output feed. Yamaha's manual says its volume and tone controls do not affect the recorded source. That is a documented example, not a rule verified for every amplifier. If lowering your stereo's speaker volume leaves the headphones unchanged, that may be normal for its recording path. Follow the amplifier's speaker-selection instructions if you want quiet room speakers; do not assume its mute button or a headphone plug will preserve the recording output.

Separate missing source audio from a pairing problem

If the headphones remain silent, note whether they connected to B66 or to another device, then trace the wired feed. Confirm OUT at the amplifier, the selected source or record selector, B66 power and TX mode, and headphone volume. Try a different known-working analog source already available in your system before changing several settings. If only one source fails, that comparison is useful information about the amplifier's routing, not proof that B66 is faulty. Send the amplifier model, a photo of the output labels, the source connection and headphone model for help. These manuals explain connection requirements; we have not independently tested these amplifier/headphone combinations or verified synchronized speaker and headphone playback.

← All audio guides
WhatsApp us