United States delivery only · Ships from China within 2 days
Built to keep good audio gear in use — now with wireless music.
Home stereo

One Windows 11 app is silent? B35 and B66 stereo checks

Other Windows sounds reach your B35 or B66 stereo, but one app is silent? Check the app's Volume mixer level and output before changing the receiver setup.

Keep the sound that already works as a reference

A Windows notification or one music player comes through your stereo, but another app stays silent. First confirm that the working sound really comes from the speakers connected to B35 or B66, rather than the laptop or a monitor. Keep that working setup in place. This guide covers a Windows 11 PC already sending Bluetooth audio to B35 or B66 in RX mode. If one app reaches the stereo, its successful playback gives you a useful comparison without unplugging the receiver or changing the amplifier input.

In this guide · 6 sections

Look at the affected app in Volume mixer

Leave the affected app open with a short clip playing. Right-click the speaker icon on the Windows taskbar and choose Open volume mixer. ASUS's Windows 11 sound guide shows individual app sliders and mute icons here. Find the affected app under Apps, check its mute state, and raise its own slider to a modest audible level. A high overall volume setting is not a reason to skip this row. Change the app's setting first and replay the clip, keeping the amplifier volume steady so you can hear what that one adjustment did.

Check that app's output device

Microsoft documents that an app can send sound to a different output from the Windows system default. In Settings, open System, Sound and Volume mixer, then inspect the affected app's Output device under Apps. Choose the connected Bluetooth receiver entry that corresponds to the stereo you are using. Use the name Windows actually displays for your unit; no particular AUDORIVO device name is promised here. An app assigned to a monitor, another headset or the PC speakers needs a routing check even when other Windows sounds already reach the stereo. Keep microphone input settings separate from this listening check.

Check the player's own sound controls

Return to the app and inspect its playback controls. Confirm the clip is playing, its speaker control is not muted, and its own volume is audible. For a video inside a browser, inspect the video's controls as well as the browser's entry in Volume mixer. Try a second clip in that same app without changing the output device. If the second clip is audible, note which file or page stays silent. If the app has its own speaker or playback-device selector, record that selection too. These comparisons help describe an app or content problem; they do not prove a receiver fault.

Leave the receiver on the working audio path

B35 supplies analog sound from its AUX or RCA output to a compatible line input on an amplifier or powered speakers. B66 does that receiving job in RX mode, shown as blue in its supplied instructions. Both require USB-C 5V power. Keep that mode, power connection and stereo input unchanged while comparing the apps. Switching B66 to TX would change its job. A PC connected by an analog cable to B66 for sending sound to Bluetooth headphones is a separate arrangement, covered in the linked PC transmitter guide. In this article, the PC's Bluetooth output feeds the receiver and the wired stereo.

Retest the app before changing the shared setup

After a setting change, pause the working reference player and retry the previously silent app. If needed, close and reopen that app, then check its output again. Keep a note of the change that restored sound: an app mute, its Windows output, or a control inside the player. If it remains silent, include the Windows version, app name and receiver entry when following Microsoft's further troubleshooting guidance. If playback works but breaks up, use the separate dropout guide instead. The Windows instructions explain software controls; they do not certify B35 or B66 with every PC, Bluetooth driver or app.

← All audio guides
WhatsApp us